– 315 –
CHAPTER 3 System Messages
- MUX card (STBY) linkage
condition
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
0: -
1: MUX connection error
(functional fault/not
mounted)
MG 1 MG 0
Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
MG 3 MG 2
Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
MG 5 MG 4
Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
MG 7 MG 6
As shown in the following table, each bit represents the Unit number
allocated for each MUX card in position. When “1” is set, the
corresponding MUX card (status: STBY) has a functional failure or is not
mounted in the proper location.
7 10
7
8
9
10
To Next Page
Loading...
