NEC UNIVERGE SV8500 - Page 478

– 431 –
CHAPTER 3 System Messages
Details on Detected Error
~ Data Analyzed by NEC Engineers
When =03 (SMDR) / 04 (MCI)
Device Number of error-detected Client PC
Kind of Error
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
11
-When 01/02 is output at (HEX)
b0-b7: 01
-When 06 is output at (HEX)
b0-b7: 01
-When 08 is output at (HEX)
b0-b7: 01
-When 09/0A is output at (HEX)
b0-b7: 00
-When 0B is output at (HEX)
b0-b7: 01
10
11
10
1110
1110
1110
12
28
When 01/02/06/08/0A/0B is output at , MAT input
information is displayed.
1110
8
9
b0-b7: (HEX)
01=SEND Execution Error
02=RECEIVE Execution Error
03=SEND Execution Count Over
04=RECEIVE Execution Count Over
05=System Data is not assigned
06=Time Over
07=Parity Error
08=Connection Error
09=Connection Port Capacity Over
0A=Detection of B-level Infinite Loop
0B=Disconnection from remote
0C=Undefined message receive
0D=SEND Execution Error
0E=Duplicated device number is used
0F=TCP/IP Internal Process Error
10=TCP/IP Internal Process Error
b0-b7: (HEX)
Device Number of error-detected Client PC.
If the Machine Number is not determined, FF
is output.
10