– 433 –
CHAPTER 3 System Messages
When =06 (PMS)
Device Number of error-detected PC (HEX)
Error Kind (ERRK)
Note: This information is printed when PMS is used.
When =09 (CS REPORT)
Device Number of error-detected Client PC (HEX)
Error Kind (ERRK)
Note: This information is printed when PMS is used.
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
8
9
b0-b7: Device Number of error-detected Client PC. If the
Machine is not determined, FF is output.
10
b0-b7: Error Kind (HEX)
01: SEND Execution error
02: RECEIVE Execution error
05: System Data is not assigned
8
9
b0-b7: (HEX)
Device number for external LANs whose fault has
occurred. Non-specified equipment indicates “00”.
10
b0-b7: Error Kind (HEX)
01=SEND Execution Error
02=RECEIVE Execution Error
03=SEND Execution Count Over
05=System data is not assigned
06=Time Over
07=Parity Error
08=Connection Error
09=Invalid Device Error
0B=Client Forced Disconnection
0D=Identical Data Consecutive Receive
0E=Device number is same.
10=Process Stop
11 =Process Activation Error
12 =DB related error when receiving call data
13 =DB related error when compiling call data
14 =DB related error when editing reports
15 =DB Capacity Alarm
16 =Resource Error of HD
To Next Page
Loading...
