NEC UNIVERGE SV8500 - Page 512

– 465 –
CHAPTER 3 System Messages
09 02 01 - : Cause of socket option setting error
(Error number notified by the TCP/IP module)
- : Socket number with error
(Socket number will be indicated as “0” when failed to generate the
socket number)
02 : Cause of error cause: 01 (Socket generating error)
: 02 (Bind error)
: 03 (Call Back setting error)
- : Cause of socket option setting error
(Error number notified by the TCP/IP module)
- : Socket number with error
(Socket number will be indicated as “0” when failed to generate the
socket number)
03 - : Cause of socket option setting error
(Error number notified by the TCP/IP module)
- : Socket number with error
(Socket number will be indicated as “0” when failed to generate the
socket number)
: Destination FPC number
- : Destination IP Address
: Destination PBI number
- : UDP Sending packet ID
(Indicated as “0” when it is not re-send)
Table 3-2 Troubleshooting For Fault Information
FNC( ) INF( ) FLT( ) SOLUTION
3 4 5
6 9
10
13
6
7
10
11
14
6 9
10
13
14
15
18
19
20 21