– 785 –
CHAPTER 7 Maintenance Commands
<TCP/IP>
Output Device
None
Fault printer: Debug information is output to fault printer.
IO Port: IO port of fault printer [1-7]
Remote Host: Debug information is output to a remote host.
TCP/IP Debug information output
None: Suspend TCP/IP trace data.
Warnings: Only warning messages are output.
TX/RX data and Warnings:
Protocol Filter
:This group box is displayed only when TX/RX data and Warnings is checked. The following can be spec-
ified for output of trace information.
UDP: Information such as registration and signaling speech between system and IP terminals.
ICMP: Information regarding PCPro, SMDR, and OAI server
TCP: Information such as PING
ARP: Information regarding Address Resolution Protocol
IP Address and Port Number Filter
:This group box is displayed only when TX/RX data and Warnings are checked. The following can be spec-
ified for output of trace information.
Number of bits to check (0=No Filter)
Filtering Address:
UDP or TCP port number (0=No Filter)
Port No.
Protocol Usage
3456 UDP Registration
60000 TCP PCPro
To Next Page
Loading...
