– 794 –
CHAPTER 7 Maintenance Commands
35 - SIP Terminal Call Transfer
36 - SPD Name Data
37 - Mobility Access Data
38 - Day/Night Data
39 - Local Phone book Data
40 - Soft Switch Data
LP No.: Designate the LP number. (Required when 12, 13, 18, 19, 23, 26, 27, 28 or 37 is selected
in the Data parameter.)
Drive Select: Designate the Drive of HDD.
•When 11 - 19, 22, 23, 26 - 29, 32 - 40 is selected in the Data parameter:
Drive B
Drive C
File Name: After assigning the parameters above and then pressing the Get button, the related file
names are listed in the display field at the bottom part of the command screen. By
double-clicking any of the file names, the name is listed in this parameter.
Output data
CNT (Count No.)
File Name
Date
Size
Buttons
Get: Display the related Program/Office Data file information.
Del.: Delete the Program/Office Data file specified in the File Name parameter.
Exit: Exit this command.
To Next Page
Loading...
