– 864 –
CHAPTER 7 Maintenance Commands
•Other
SIP Station
• SIP Media Converter
8MC [SIP]
Note 5: To display DtermSP30 used as ACD agent position, select Soft Phone (SP20).
• Station
• “Station Kind” Field
•Station Number
Specify the range of Tenant Number in the START TN and END TN
Specify the range of Station Number in the START STN and END TN
• Telephone Number (NDM)
START UGN and END UGN (fixed to 1)
Specify the range of Telephone Number in the START TELN and END TELN
• Telephone Number (LDM)
START UGN and END UGN (fixed to 1)
Specify the range of Telephone Number in the START TELN and END TELN
•Trunk
Specify the range of Route Number in the START RT and END RT
Specify the range of Trunk Number in the START TK and END TK
• IPCS/IPZT
PCN: PCS / PHS Community Number [1-1024]
Specify the range of Calling Area Number in the START ERN and END ERN [1-32]
Specify the range of Group Number in the START GRN and END GRN [1-8]
Specify the range of IPCS Number in the START CSN / ZTN and END CSN / ZTN [1-32]
• GateKeeper
GKID: Gate Keeper ID [1-255]
•PH Control
Specify the PH LENS.
To Next Page
Loading...
