– 892 –
CHAPTER 7 Maintenance Commands
Click “Option” in the menu bar, and select “Drive Select”. Then, a window, with the following parameter,
appears. On the window, designate the affected Drive:
Office Data: Drive B (default setting)
Drive C
Drive B/C
Note 1: When Data Memory is selected, Network Data Memory (NDM) and Local Data Memory (LDM) are
also saved/verified simultaneously.
Note 2: By saving the Number Sharing data, the data concerning Dual Station Calling Over-FCCS is also
saved/verified automatically.
Note 3: This data must be specified only when using the “Redundant Data Memory Backup on Individual Hard
Drive” function. When using this feature, consider the following:
•When “Drive B/C” is specified in the “Office Data” parameter when “Verify HDD against MEM”
has been selected for in the “Direction Select” parameter, the data is written to Drive-D only.
Note 4: This data is for WLAN Handset (MH Series) and SIP standard terminals.
Output data
Information:
FPC of Node in which saving/verifying is executed
Result of the execution
Direction:
MEM to HDD
Verify HDD against MEM
Data Type:
Selected Data Type
To Next Page
Loading...
