NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-43
202-10102-01, May 2005
no shutdown
This command enables a port.
Format
no shutdown
Mode Interface Config
shutdown all
This command disables all ports.
Default
enabled
Format shutdown all
Mode Global Config
no shutdown all
This command enables all ports.
Format
no shutdown all
Mode Global Config
speed
This command sets the speed and duplex setting for the interface.
Format
speed {<100 | 10> <half-duplex | full-duplex>}
Mode Interface Config
Acceptable values are:
100h
100BASE-T half duplex
100f 100BASE-T full duplex
10h 10BASE-T half duplex
10f 10BASE-T full duplex
speed all
This command sets the speed and duplex setting for all interfaces.