NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-49
202-10102-01, May 2005
Group ID This field displays the group identifier of the protocol group.
Protocol(s) This field indicates the type of protocol(s) for this group.
VLAN This field indicates the VLAN associated with this Protocol Group.
Interface(s) This field lists the slot/port interface(s) that are associated with this Protocol
Group.
show storm-control
This command displays switch configuration information.
Format
show storm-control
Mode Privileged EXEC
Broadcast Storm Recovery Mode May be enabled or disabled. The factory default is dis-
abled.
802.3x Flow Control Mode May be enabled or disabled. The factory default is disabled.
Virtual LAN (VLAN) Commands
vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification
number (ID 1 is reserved for the default VLAN). VLAN range is 2-4094.
Format
vlan <2-4094>
Mode VLAN database
no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is
reserved for the default VLAN). VLAN range is 2-4094.
Format
no vlan <2-4094>
Mode VLAN database