NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-3
202-10102-01, May 2005
Machine Model Specifies the machine model as defined by the Vital Product Data.
Serial Number The unique box serial number for this switch.
FRU Number The field replaceable unit number.
Part Number Manufacturing part number.
Maintenance Level Indicates hardware changes that are significant to software.
Manufacturer Manufacturer descriptor field.
Burned in MAC Address Universally assigned network address.
Software Version The release.version.revision number of the code currently running on
the switch.
Operating System The operating system currently running on the switch.
Network Processing Element The type of the processor microcode.
Additional Packages This displays the additional packages that are incorporated into this system,
such as BGP-4 or Multicast.
show interface
This command displays a summary of statistics for a specific port or a count of all CPU traffic
based upon the argument.
Format
show interface {<slot/port> | switchport}
Mode Privileged EXEC
The display parameters, when the argument is ' <slot/port>', is as follows :
Packets Received Without Error
The total number of packets (including broadcast packets
and multicast packets) received by the processor.
Packets Received With Error The number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol.
Broadcast Packets Received The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast packets.
Packets Transmitted Without Error The total number of packets transmitted out of the inter-
face.
Transmit Packets Errors The number of outbound packets that could not be transmitted because
of errors.
Collisions Frames The best estimate of the total number of collisions on this Ethernet seg-
ment.