NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-47
202-10102-01, May 2005
Mac Address A unicast MAC address for which the switch has forwarding and or filtering
information. The format is 6 or 8 two-digit hexadecimal numbers that are sepa-
rated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC
address will be displayed as 8 bytes.
Type This displays the type of the entry. Static entries are those that are configured by
the end user. Dynamic entries are added to the table as a result of a learning pro-
cess or protocol.
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering
(Flt:).
show mac-address-table stats
This command displays the Multicast Forwarding Database (MFDB) statistics.
Format
show mac-address-table stats
Mode Privileged EXEC
Total Entries This displays the total number of entries that can possibly be in the Multicast
Forwarding Database table.
Most MFDB Entries Ever Used This displays the largest number of entries that have been present in
the Multicast Forwarding Database table. This value is also known as the
MFDB high-water mark.
Current Entries This displays the current number of entries in the Multicast Forwarding Data-
base table.
show monitor
This command displays the Port monitoring information for the system.
Format
show monitor
Mode Privileged EXEC
Port Monitor Mode indicates whether the Port Monitoring feature is enabled or disabled.
The possible values are enable and disable.
Probe Port slot/port is the slot/port configured as the probe port. If this value has not been
configured, 'Not Configured' will be displayed.
Monitored Port slot/port is the slot/port configured as the monitored port. If this value
has not been configured, 'Not Configured' will be displayed.