NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
9-22 Security Commands
202-10102-01, May 2005
length. Bad authenticators or signature attributes or unknown types are not
included as malformed access responses.
Bad Authenticators The number of RADIUS Access-Response packets containing invalid authenti-
cators or signature attributes received from this server.
Pending Requests The number of RADIUS Access-Request packets destined for this server that
have not yet timed out or received a response.
Timeouts The number of authentication timeouts to this server.
Unknown Types The number of RADIUS packets of unknown types, which were received from
this server on the authentication port.
Packets Dropped The number of RADIUS packets received from this server on the authentication
port and dropped for some other reason.
Secure Shell (SSH) Commands
This section provides a detailed explanation of the SSH commands. The commands are divided
into the following groups:
• Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
• Show commands are used to display switch settings, statistics and other information
Note: A maximum of 5 SSH sessions is allowed.
ip ssh
This command is used to enable SSH.
Default
disabled
Format ip ssh
Mode Privileged EXEC
no ip ssh
This command is used to disable SSH.
Format
no ip ssh
Mode Privileged EXEC