NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-64 Switching Commands
202-10102-01, May 2005
copy nvram:configscript <scriptname> <tftp://<ip
address>/> <filename>
copy <tftp://<ip address>/> <filename> nvram:startup-
config
copy <tftp://<ip address>/> <filename> system:image
copy <tftp://<ip address>/> <filename> nvram:
copy system:running-config nvram:startup-config
copy <tftp://<ip address>/> <filename> nvram:sslpem-
root
copy <tftp://<ip address>/> <filename> nvram:sslpem-
server
copy <tftp://<ip address>/> <filename> nvram:sslpem-
dhweak
copy <tftp://<ip address>/> <filename> nvram:sslpem-
dhstrong
copy <tftp://<ip address>/> <filename> nvram:sshkey-
rsa1
copy <tftp://<ip address>/> <filename> nvram:sshkey-
rsa2
copy <tftp://<ip address>/> <filename> nvram:sshkey-
dsa
copy <tftp://<ip address>/> <filename> nvram:cliban-
ner
Mode Privileged EXEC
Pre-login Banner Command
This section provides a detailed explanation of the Pre-login Banner command.
copy
The copy command includes the “clibanner” option. This command uploads and downloads to/
from the switch. Local URLs can be specified using tftp or xmodem.
Default
none
Format copy <tftp://<ip address>/> <filename> nvram:cliban-
ner
Mode Privileged EXEC