NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Quality of Service (QoS) Commands 10-19
202-10102-01, May 2005
Format assign-queue <queueid>
Mode Policy-Class-Map Config
Incompatibilities Drop
drop
This command specifies that all packets for the associated traffic stream are to be dropped at
ingress.
Format
drop
Mode Policy-Class-Map Config
Incompatibilities Assign Queue, Mark (all forms), Police
redirect
This command specifies that all incoming packets for the associated traffic stream are redirected to
a specific egress interface (physical port).
Format
redirect <slot/port>
Mode Policy-Class-Map Config
Incompatibilities Drop
conform-color
This command is used to enable color-aware traffic policing and define the conform-color class
map. Used in conjunction with the police command where the fields for the conform level are
specified. The <class-map-name> parameter is the name of an existing Diffserv class map.
Note: This command may only be used after specifying a police command for the policy-class
instance.
Format
conform-color <class-map-name>
Mode Policy-Class-Map Config