NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-55
202-10102-01, May 2005
Mode Global Config
no vlan protocol group add protocol
This command removes the <protocol> from this protocol-based VLAN group that is identified by this <groupid>.
The possible values for protocol are ip, arp, and ipx.
Format no vlan protocol group add protocol <groupid> <proto-
col>
Mode Global Config
vlan protocol group remove
This command removes the protocol-based VLAN group that is identified by this <groupid>.
Format
vlan protocol group remove <groupid>
Mode Global Config
protocol group
This command attaches a <vlanid> to the protocol-based VLAN identified by <groupid>. A
group may only be associated with one VLAN at a time, however the VLAN association can be
changed.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
Default
none
Format protocol group <groupid> <vlanid>
Mode VLAN database
no protocol group
This command removes the <vlanid> from this protocol-based VLAN group that is identified by
this <groupid>.
Format
no protocol group <groupid> <vlanid>
Mode VLAN database