NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Security Commands 9-3
202-10102-01, May 2005
port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses. The <vid> is
the VLAN ID.
Format
port-security mac-address <vid> <mac-address>
Mode Interface Config
no port-security mac-address
This command removes a MAC address from the list of statically locked MAC addresses.
Format
no port-security mac-address <vid> <mac-address>
Mode Interface Config
port-security mac-address move
This command converts dynamically locked MAC addresses to statically locked addresses.
Format
port-security mac-address move
Mode Interface Config
snmp-server enable traps violation
This command enables the sending of new violation traps designating when a packet with a
disallowed MAC address is received on a locked port.
Default
Disabled
Format snmp-server enable traps violation
Mode Interface Config
no snmp-server enable traps violation
This command disables the sending of new violation traps.
Format
no snmp-server enable traps violation
Mode Interface Config