NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-93
202-10102-01, May 2005
Address Pool The number of configured address pools in the DHCP server.
Automatic bindings The number of IP addresses that have been automatically mapped to the
MAC addresses of hosts that are found in the DHCP database.
Manual bindings The number of IP addresses that have been manually mapped to the
MAC addresses of hosts that are found in the DHCP database.
Expired bindings The number of expired leases.
Malformed messages The number of truncated or corrupted messages that were received by
the DHCP server.
Message Received
DHCPREQUEST The number of DHCPREQUEST messages that were received by the
server.
DHCPDECLINE The number of DHCPDECLINE messages that were received by the
server.
DHCPRELEASE The number of DHCPRELEASE messages that were received by the
server.
DHCPINFORM The number of DHCPINFORM messages that were received by the
server.
Message Sent
DHCPOFFER The number of DHCPOFFER messages that were sent by the server.
DHCPACK The number of DHCPPACK messages that were sent by the server.
DHCPNACK The number of DHCPNACK messages that were sent by the server.
show ip dhcp conflict
This command displays address conflicts logged by the DHCP Server. If no IP address is specified,
all the conflicting addresses are displayed.
Format
show ip dhcp conflict [ip-address]
Modes Privileged EXEC
User EXEC
IP address The IP address of the host as recorded on the DHCP server.
Detection Method The manner in which the IP address of the hosts were found on the
DHCP Server
Detection time The time when the conflict was found.