User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-67
202-10102-01, May 2005
configscript validate
This command validates a configuration script file by parsing each line in the script file where
<scriptname> is the name of the script to be validated. The validation will stop at the first failure of
a command.
Format
configscript validate <scriptname>
Mode Global Config
System Log (Syslog) Commands
This section provides a detailed explanation of the Syslog commands. The commands are divided
into two functional groups:
• Show commands display spanning tree settings, statistics, and other information.
• Configuration Commands configure features and options of the device. For every
configuration command there is a show command that displays the configuration setting.
logging buffered
This command enables logging to an in-memory log where up to 128 logs are kept. The
<severitylevel> value is specified as either an integer from 0 to 7 or symbolically through one of
the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5),
informational (6), debug (7).
Default
disabled; critical
Format logging buffered [severitylevel]
Mode Global Config
no logging buffered
This command disables logging to in-memory log.
Format
no logging buffered
Mode Global Config
To Next Page
Loading...
