User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-133
202-10102-01, May 2005
show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree instance.
The <vlanid> corresponds to an existing VLAN ID.
Format
show spanning-tree vlan <vlanid>
Modes Privileged EXEC
User EXEC
VLAN Identifier The VLANs associated with the selected MST instance.
Associated Instance Identifier for the associated multiple spanning tree instance or "CST" if
associated with the common and internal spanning tree.
To Next Page
Loading...
