NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-116 Switching Commands
202-10102-01, May 2005
Default enabled
Format port-channel linktrap {<logical slot/port> | all}
Mode Global Config
no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is a
logical unit, slot and port slot and port for a configured port-channel. The option
all sets every
configured port-channel with the same administrative mode setting.
Format
no port-channel linktrap {<logical slot/port> | all]
Mode GlobalConfig
port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical slot/port for a
configured port-channel, and name is an alphanumeric string up to 15 characters. This command is
used to modify the name that was associated with the port-channel when it was created.
Format
port-channel name {<logical slot/port> | all | <name>}
Mode Global Config
show port-channel brief
This command displays the static capability of all port-channels (LAGs) on the device as well as a
summary of individual port-channels.
Format
show port-channel brief
Mode Privileged EXEC and User EXEC
Static Capability This field displays whether or not the device has static capability
enabled.
For each port-channel the following information is displayed:
Name This field displays the name of the port-channel.
Link State This field indicates whether the link is up or down.
Mbr Ports This field lists the ports that are members of this port-channel, in <slot/
port> notation.