NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-115
202-10102-01, May 2005
port-channel
This command configures a new port-channel (LAG) and generates a logical slot/port number for
the port-channel. The <name> field is a character string which allows the dash '-' character as well
as alphanumeric characters. Display this number using the “show port-channel”.
Note: Before including a port in a port-channel, set the port physical mode. See ‘speed’ command.
Format port-channel <name>
Mode Global Config
no port-channel
This command deletes a port-channel (LAG).
Format
no port-channel {<logical slot/port> | all}
Mode Global Config
port-channel adminmode all
This command enables a port-channel (LAG). The interface is a logical slot/port for a configured
port-channel. The option
all sets every configured port-channel with the same administrative
mode setting.
Format
port-channel adminmode all
Mode Global Config
no port-channel adminmode
This command disables a port-channel (LAG). The interface is a logical slot/port for a configured
port-channel. The option
all sets every configured port-channel with the same administrative
mode setting.
Format
no port-channel adminmode all
Mode Global Config
port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a logical
slot/port for a configured port-channel. The option
all sets every configured port-channel with
the same administrative mode setting.