NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Quality of Service (QoS) Commands 10-31
202-10102-01, May 2005
no cos-queue min-bandwidth
This command restores the default for each queue's minimum bandwidth value.
Format
no cos-queue min-bandwidth
Modes Global Config
Interface Config
cos-queue strict
This command activates the strict priority scheduler mode for each specified queue.
Format
cos-queue strict <queue-id-1> [<queue-id-2> … <queue-
id-n>]
Modes Global Config
Interface Config
no cos-queue strict
This command restores the default weighted scheduler mode for each specified queue.
Format
no cos-queue strict <queue-id-1> [<queue-id-2> …
<queue-id-n>]
Modes Global Config
Interface Config
traffic-shape
This command specifies the maximum transmission bandwidth limit for the interface as a whole.
Also known as rate shaping, this has the effect of smoothing temporary traffic bursts over time so
that the transmitted traffic rate is bounded.
Format
traffic-shape <bw>
Modes Global Config
Interface Config
no traffic-shape
This command restores the interface shaping rate to the default value.
Format
no traffic-shape