NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-66 Switching Commands
202-10102-01, May 2005
configscript apply
This command applies the commands in the configuration script to the switch. The apply
command backs up the running configuration and then starts applying the commands in the script
file. Application of the commands stops at the first failure of a command. The <scriptname>
parameter is the name of the script to be applied.
Format
configscript apply <scriptname>
Mode Global Config
configscript delete
This command deletes a specified script where the <scriptname> parameter is the name of the
script to be deleted. The ‘all’ option deletes all the scripts present on the switch.
Format
configscript delete {<scriptname> | all}
Mode Global Config
configscript list
This command lists all scripts present on the switch as well as the total number of files present.
Format
configscript list
Mode Global Config
Configuration Script Name of the configuration script.
Size Size of the configuration script.
configscript show
This command displays the contents of a script file. The parameter <scriptname> is the name of
the script file.
Format
configscript show <scriptname>
Mode Global Config
The format of display is Line <no>: <Line contents>