NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-104 Switching Commands
202-10102-01, May 2005
no set gvrp adminmode
This command disables GVRP.
Format
no set gvrp adminmode
Mode Privileged EXEC
set gvrp interfacemode
This command enables GVRP (GARP VLAN Registration Protocol) for a specific port.
Default
disabled
Format set gvrp interfacemode
Mode Interface Config
no set gvrp interfacemode
This command disables GVRP (GARP VLAN Registration Protocol) for a specific port. If GVRP
is disabled, Join Time, Leave Time and Leave All Time have no effect.
Format
no set gvrp interfacemode
Mode Interface Config
set gvrp interfacemode all
This command enables GVRP (GARP VLAN Registration Protocol) for all ports.
Default
disabled
Format set gvrp interfacemode all
Mode Global Config
no set gvrp interfacemode all
This command disables GVRP (GARP VLAN Registration Protocol) for all ports. If GVRP is
disabled, Join Time, Leave Time and Leave All Time have no effect.
Format
no set gvrp interfacemode all
Mode Global Config