NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-119
202-10102-01, May 2005
The interface is a logical slot/port for a configured port-channel. The all option sets all
configured port-channels (LAGs) with the same option.
The mode is one of the following:
802.1d
IEEE 802.1D-compliant STP mode is used
fast Fast STP mode is used
off STP is turned off
Format spanning-tree {<logical slot/port> | all | <off |
802.1d | fast>}
Mode Global Config
spanning-tree
This command sets the spanning-tree operational mode to enabled.
Default
disabled
Format spanning-tree
Mode Global Config
no spanning-tree
This command sets the spanning-tree operational mode to disabled. While disabled, the spanning-
tree configuration is retained and can be changed, but is not activated.
Format
no spanning-tree
Mode Global Config
spanning-tree bpdumigrationcheck
This command enables BPDU migration check on a given interface. The all option enables BPDU
migration check on all interfaces.
Format
spanning-tree bpdumigrationcheck {<slot/port> | all}
Mode Global Config