NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-88 Switching Commands
202-10102-01, May 2005
domain-name
This command specifies the domain name for a DHCP client. The <domain> specifies the domain
name string of the client.
Default
none
Format domain-name <domain>
Mode DHCP Pool Config
no domain-name
This command removes the domain name.
Format
no domain-name
Mode DHCP Pool Config
ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The addresses are from
the automatic address pool.
Default
disable
Format ip dhcp bootp automatic
Mode Global Config
no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address are from the
automatic address pool.
Format
no ip dhcp bootp automatic
Mode Global Config
ip dhcp conflict logging
This command enables conflict logging on DHCP server.
Default
enabled
Format ip dhcp conflict logging