NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
10-28 Quality of Service (QoS) Commands
202-10102-01, May 2005
show diffserv service brief
This command displays all interfaces in the system to which a DiffServ policy has been attached.
The inbound direction parameter is optional.
Format
show diffserv service brief [in]
Mode Privileged EXEC
DiffServ Mode The current setting of the DiffServ administrative mode. An attached
policy is only active on an interface while DiffServ is in an enabled
mode.
The following information is repeated for interface and direction (only those
interfaces configured with an attached policy are shown):
Interface
Valid slot and port number separated by forward slashes.
Direction The traffic direction of this interface service.
OperStatus The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direc-
tion.
show policy-map interface
This command displays policy-oriented statistics information for the specified interface and
direction. The <slot/port
> parameter specifies a valid interface for the system.
Note: This command is only allowed while the DiffServ administrative mode is enabled.
Format
show policy-map interface <slot/port> [in]
Mode Privileged EXEC
Interface Valid slot and port number separated by forward slashes.
Direction The traffic direction of this interface service.
Operational Status The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direc-
tion.
The following information is repeated for each class instance within this pol-
icy: Class Name
The name of this class instance.
In Discarded Packets A count of the packets discarded for this class instance for any reason
due to DiffServ treatment of the traffic class.