NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-52 Switching Commands
202-10102-01, May 2005
exclude The interface is never a member of this VLAN. This is equivalent to
registration forbidden.
auto The interface is dynamically registered in this VLAN by GVRP. The
interface will not participate in this VLAN unless a join request is
received on this interface. This is equivalent to registration normal.
vlan participation all
This command configures the degree of participation for all interfaces in a VLAN. The ID is a
valid VLAN identification number
.
Format vlan participation all <exclude | include | auto> <1-
4094>
Mode Global Config
Participation options are:
include
The interface is always a member of this VLAN. This is equivalent to
registration fixed.
exclude The interface is never a member of this VLAN. This is equivalent to
registration forbidden.
auto The interface is dynamically registered in this VLAN by GVRP. The
interface will not participate in this VLAN unless a join request is
received on this interface. This is equivalent to registration normal.
vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces. For VLAN Only mode, untagged
frames or priority frames received on this interface are discarded. For Admit All mode, untagged
frames or priority frames received on this interface are accepted and assigned the value of the
interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Default
admit all
Format vlan port acceptframe all <vlanonly | all>
Mode Global Config