NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-92 Switching Commands
202-10102-01, May 2005
Number of Ping Packets The maximum number of Ping Packets that will be sent to verify that
an ip address id not already assigned.
Excluded Address The ranges of IP addresses that a DHCP server should not assign to
DHCP clients.
show ip dhcp pool configuration
This command displays pool configuration. If all is specified, configuration for all the pools is
displayed.
Format
show ip dhcp pool configuration {<name> | all}
Modes Privileged EXEC
User EXEC
Pool Name The name of the configured pool.
Pool Type The pool type.
Lease Time The lease expiration time of the IP Address assigned to the client.
DNS Servers The list of DNS servers available to the DHCP client
Default Routers The list of the default routers available to the DHCP client
Following additional field is displayed for Dynamic pool type:
Network
The network number and the mask for the DHCP address pool.
Following additional fields are displayed for Manual pool type:
Client Name
The name of a DHCP client.
Client Identifier The unique identifier of a DHCP client.
Hardware Address The hardware address of a DHCP client.
Hardware Address Type The protocol of the hardware platform.
Host The IP address and the mask for a manual binding to a DHCP client.
show ip dhcp server statistics
This command displays DHCP server statistics.
Format
show ip dhcp server statistics
Modes Privileged EXEC
User EXEC