NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-37
202-10102-01, May 2005
no auto-negotiate all
This command disables automatic negotiation on all ports.
Format
no auto-negotiate all
Mode Global Config
deleteport (Interface Config)
This command deletes the port from the port-channel (LAG). The interface is a logical unit, slot
and port slot and port number of a configured port-channel.
Format
deleteport <logical slot/port>
Mode Interface Config
deleteport (Global Config)
This command deletes all configured ports from the port-channel (LAG). The interface is a logical
unit, slot and port slot and port number of a configured port-channel.
Format
deleteport {<logical slot/port> | all}
Mode Global Config
macfilter
This command adds a static MAC filter entry for the MAC address <macaddr> on the VLAN
<vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the
format of b1:b2:b3:b4:b5:b6.
The restricted MAC Addresses are: 00:00:00:00:00:00, 01:80:C2:00:00:00 to 01:80:C2:00:00:0F,
01:80:C2:00:00:20 to 01:80:C2:00:00:21, and FF:FF:FF:FF:FF:FF.
The <vlanid> parameter must identify a valid VLAN.
Up to 100 static MAC filters may be created.
Format
macfilter <macaddr> <vlanid>
Mode Global Config