NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-71
202-10102-01, May 2005
Syslog Logging Administrative Mode The mode for logging to configured syslog hosts. If
set to disable logging stops to all syslog hosts.
Log Messages Received The number of messages received by the log process. This includes
messages that are dropped or ignored
Log Messages Dropped The number of messages that could not be processed.
show logging persistent
This command displays logging.
Format
show logging persistent
Mode Privileged EXEC
Persistent Logging Administrative Mode
The mode for historical logging.
Persistent Logging Severity Filter The minimum severity to log to the historical log. Mes-
sages with an equal or lower numerical severity are logged.
Persistent Log Count: The number of messages received by the log process. This includes
messages that are dropped or ignored
Log Messages:
The log messages appear here.
show logging buffered
This command displays buffered logging (system startup and system operation logs).
Format
show logging buffered
Mode Privileged EXEC
Admin Status The current state of the in-memory log.
Severity Level Filter The minimum severity to log to the in memory log. Messages with an
equal or lower numerical severity are logged.
Component Filter The component(s) from which received messages are to be logged to the
in memory log. Either a single component id or "all components" may
be specified.
Wrapping Behavior The behavior of the In Memory log when faced with a log full situation.
Log Count The count of valid entries in the buffered log.
Log Messages: The log messages appear here.