NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-112 Switching Commands
202-10102-01, May 2005
Fast Leave Mode This indicates whether or not IGMP Snooping Fast-leave is active on the
VLAN.
Group Membership Interval Time The Group Membership Interval time is the amount of time in
seconds that a switch will wait for a report from a particular group on a particu-
lar interface, which is participating in the VLAN, before deleting the interface
from the entry.This value may be configured
show igmpsnooping fast-leave
This command displays IGMP Snooping Fast-leave information. Configured information is
displayed whether or not IGMP Snooping is enabled.
Format
show igmpsnooping fast-leave <slot/port>
Mode Privileged EXEC
Fast-Leave Admin Mode This indicates whether or not IGMP Snooping Fast-leave is active on the inter-
face.
show igmpsnooping mrouter interface
This command displays information about statically configured ports.
Format
show igmpsnooping mrouter interface <slot/port>
Mode Privileged EXEC
Slot/Port The port on which multicast router information is being displayed.
Multicast Router Attached This indicates whether or not multicast router is statically enabled on the
interface.
VLAN ID The list of VLANs of which the interface is a member.
show mac-address-table igmpsnooping
This command displays the IGMP Snooping entries in the Multicast Forwarding Database
(MFDB) table.
Format
show mac-address-table igmpsnooping
Mode Privileged EXEC
Mac Address A multicast MAC address for which the switch has forwarding and or filtering
information. The format is two-digit hexadecimal numbers that are separated by