NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-117
202-10102-01, May 2005
Active Ports This field lists the ports that are actively participating in this port-chan-
nel.
show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
Format
show port-channel {<logical slot/port> | all}
Modes Privileged EXEC
User EXEC
Logical slot/port Valid slot and port number separated by forward slashes.
Lag Name The name of this port-channel (LAG). You may enter any string of up to
15 alphanumeric characters.
Link State Indicates whether the Link is up or down.
Admin Mode May be enabled or disabled. The factory default is enabled.
Link Trap Mode This object determines whether or not to send a trap when link status
changes. The factory default is enabled.
STP Mode The Spanning Tree Protocol Administrative Mode associated with the
port or port-channel (LAG). The possible values are:
Disable - Spanning tree is disabled for this port.
Enable - Spanning tree is enabled for this port.
Mbr Ports A listing of the ports that are members of this port-channel (LAG), in
slot/port notation. There can be a maximum of eight ports assigned to a
given port-channel (LAG).
Port Speed Speed of the port-channel port.
Type This field displays the status designating whether a particular port-chan-
nel (LAG) is statically or dynamically maintained.
Static - The port-channel is statically maintained.
Dynamic - The port-channel is dynamically maintained.
Active Ports This field lists the ports that are actively participating in the port-chan-
nel (LAG).
show port-channel summary
This command displays the static capability of all LAGs on the device as well as a summary of
individual LAGs.