NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
9-26 Security Commands
202-10102-01, May 2005
Default enabled
Format ip http server
Mode Privileged EXEC
no ip http server
This command disables access to the switch through the Web interface. When access is disabled,
the user cannot login to the switch's Web server.
Format
no ip http server
Mode Privileged EXEC
show ip http
This command displays the http settings for the switch.
Format
show ip http
Mode Privileged EXEC
Secure-Server Administrative Mode This field indicates whether the administrative mode of
secure HTTP is enabled or disabled.
Secure Protocol Level The protocol level may have the values of SSL3, TSL1, or both SSL3
and TSL1.
Secure Port This field specifies the port configured for SSLT.
HTTP Mode THis field indicates whether the HTTP mode is enabled or disabled.