NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-76 Switching Commands
202-10102-01, May 2005
show sntp
This command is used to display SNTP settings and status.
Format
show sntp
Mode Privileged Exec
Last Update Time Time of last clock update.
Last Attempt Time Time of last transmit query (in unicast mode).
Last Attempt Status Status of the last SNTP request (in unicast mode) or unsolicited message
(in broadcast mode).
Broadcast Count Current number of unsolicited broadcast messages that have been
received and processed by the SNTP client since last reboot.
Multicast Count Current number of unsolicited multicast messages that have been
received and processed by the SNTP client since last reboot
show sntp client
This command is used to display SNTP client settings.
Format
show sntp client
Mode Privileged Exec
Client Supported Modes Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version The highest SNTP version the client supports
Port SNTP Client Port
Client Mode:
Configured SNTP Client Mode
Poll Interval Poll interval value for SNTP clients in seconds as a power of two.
Poll Timeout Poll timeout value in seconds for SNTP clients.
Poll Retry Poll retry value for SNTP clients.
show sntp server
This command is used to display SNTP server settings and configured servers.
Format
show sntp server
Mode Privileged Exec