NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-59
202-10102-01, May 2005
Tagged - specifies to transmit traffic for this VLAN as tagged frames.
Untagged - specifies to transmit traffic for this VLAN as untagged
frames.
show vlan brief
This command displays a list of all configured VLANs.
Format
show vlan brief
Modes Privileged EXEC
User EXEC
VLAN ID There is a VLAN Identifier (vlanid )associated with each VLAN. The
range of the VLAN ID is 1 to 4094.
VLAN Name A string associated with this VLAN as a convenience. It can be up to 32
alphanumeric characters long, including blanks. The default is blank.
VLAN ID 1 always has a name of `Default`. This field is optional.
VLAN Type Type of VLAN, which can be Default, (VLAN ID = 1), a static (one that
is configured and permanently defined), or a Dynamic (one that is cre-
ated by GVRP registration).
show vlan port
This command displays VLAN port information.
Format
show vlan port {<slot/port> | all}
Modes Privileged EXEC
User EXEC
Slot/Port Valid slot and port number separated by forward slashes. It is possible to
set the parameters for all ports by using the selectors on the top line.
Port VLAN ID The VLAN ID that this port will assign to untagged frames or priority
tagged frames received on this port. The value must be for an existing
VLAN. The factory default is 1.
Acceptable Frame Types Specifies the types of frames that may be received on this port. The
options are 'VLAN only' and 'Admit All'. When set to 'VLAN only',
untagged frames or priority tagged frames received on this port are dis-
carded. When set to 'Admit All', untagged frames or priority tagged
frames received on this port are accepted and assigned the value of the
Port VLAN ID for this port. With either option, VLAN tagged frames
are forwarded in accordance to the 802.1Q VLAN specification.