NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-2 Switching Commands
202-10102-01, May 2005
show arp switch
This command displays connectivity between the switch and other devices. The Address
Resolution Protocol (ARP) cache identifies the MAC addresses of the IP stations communicating
with the switch.
Format
show arp switch
Mode Privileged EXEC
MAC Address A unicast MAC address for which the switch has forwarding and/or fil-
tering information. The format is 6 two-digit hexadecimal numbers that
are separated by colons, for example 01:23:45:67:89:AB
IP Address The IP address assigned to each interface.
slot/port
Valid slot and port number separated by forward slashes.
show eventlog
This command displays the event log, which contains error messages from the system. The event
log is not cleared on a system reset.
Format
show eventlog
Mode Privileged EXEC
File The file in which the event originated.
Line The line number of the event
Task Id The task ID of the event.
Code The event code.
Time The time this event occurred.
Note: Event log information is retained across a switch reset.
show hardware
This command displays inventory information for the switch.
Format
show hardware
Mode Privileged EXEC
Switch Description Text used to identify the product name of this switch.
Machine Type Specifies the machine model as defined by the Vital Product Data.