NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-65
202-10102-01, May 2005
CLI Command Logging Command
This section provides a detailed explanation of the CLI Command Logging commands.
logging cli-command
This command enables the CLI command Logging feature.The Command Logging component
enables the software to log all Command Line Interface (CLI) commands issued on the system.
Default
enabled
Format logging cli-command
Mode Global Config
no logging cli-command
Format
no logging cli-command
Mode Global Config
Configuration Scripting Commands
Configuration Scripting allows the user to generate text-formatted script files representing the
current configuration. These configuration script files can be uploaded to a PC and edited,
downloaded to the system and applied to the system. Configuration scripts can be applied to one or
more switches with no/minor modifications.
Use the show running-config command to capture the running configuration into a script. Use
the
copy command to transfer the configuration script to/from the switch.
• The file extension must be “.scr”.
• A maximum of ten scripts are allowed on the switch.
• The combined size of all script files on the switch shall not exceed 500 KB.