NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-68 Switching Commands
202-10102-01, May 2005
logging buffered wrap
This command enables wrapping of in-memory logging when full capacity reached. Otherwise
when full capacity is reached, logging stops.
Default
wrap
Format logging buffered wrap
Mode Privileged EXEC
no logging wrap
This command disables wrapping of in-memory logging and configures logging to stop when
capacity is full.
Format
no logging buffered wrap
Mode Privileged EXEC
logging console
This command enables logging to the console. The <severitylevel> value is specified as either an
integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), alert
(1), critical (2), error (3), warning (4), notice (5), informational (6), debug (7).
Default
disabled; critical
Format logging console [severitylevel]
Mode Global Config
no logging console
This command disables logging to the console.
Format
no logging console
Mode Global Config
logging persistent
This command enables logging of system startup and system operation logs to storage. The
<severitylevel> value is specified as either an integer from 0 to 7 or symbolically through one of
the following keywords: EMERGENCY (0), ALERT (1), CRITICAL (2), ERROR (3),
WARNING (4), NOTICE (5), INFORMATIONAL (6), DEBUG (7).