NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Switching Commands 8-87
202-10102-01, May 2005
Mode DHCP Pool Config
no network
This command removes the subnet number and mask.
Format
no network
Mode DHCP Pool Config
service dhcp
This command enables the DHCP server and relay agent features on the router.
Default
disabled
Format service dhcp
Mode Global Config
no service dhcp
This command disables the DHCP server and relay agent features.
Format
no service dhcp
Mode Global Config
bootfile
The command specifies the name of the default boot image for a DHCP client. The <filename>
specifies the boot image file.
Default
none
Format bootfile <filename>
Mode DHCP Pool Config
no bootfile
This command deletes the boot image name.
Format
no bootfile
Mode DHCP Pool Config