NETGEAR ProSafe GSM7248

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
9-14 Security Commands
202-10102-01, May 2005
If the optional parameter 'summary {<slot/port> | all}' is used, the dot1x configuration for the
specified port or all ports are displayed.
Port
The interface whose configuration is displayed.
Control Mode The configured control mode for this port. Possible values are force-unautho-
rized | force-authorized | auto
Operating Control Mode The control mode under which this port is operating. Possible values are
authorized | unauthorized
Reauthentication Enabled Indicates whether re-authentication is enabled on this port
Key Transmission Enabled Indicates if the key is transmitted to the supplicant for the specified port
If the optional parameter 'detail <slot/port>' is used, the detailed dot1x configuration for the
specified port are displayed.
Port
The interface whose configuration is displayed
Protocol Version The protocol version associated with this port. The only possible value is 1, cor-
responding to the first version of the dot1x specification.
PAE Capabilities The port access entity (PAE) functionality of this port. Possible values are
Authenticator or Supplicant.
Authenticator PAE State Current state of the authenticator PAE state machine. Possible values are Ini-
tialize, Disconnected, Connecting, Authenticating, Authenticated, Aborting,
Held, ForceAuthorized, and ForceUnauthorized.
Backend Authentication State Current state of the backend authentication state machine. Possible
values are Request, Response, Success, Fail, Timeout, Idle, and Initialize.
Quiet Period The timer used by the authenticator state machine on this port to define periods
of time in which it will not attempt to acquire a supplicant. The value is
expressed in seconds and will be in the range 0 and 65535.
Transmit Period The timer used by the authenticator state machine on the specified port to deter-
mine when to send an EAPOL EAP Request/Identity frame to the supplicant.
The value is expressed in seconds and will be in the range of 1 and 65535.
Supplicant Timeout The timer used by the authenticator state machine on this port to timeout the
supplicant. . The value is expressed in seconds and will be in the range of 1 and
65535.
Server Timeout The timer used by the authenticator on this port to timeout the authentication
server. The value is expressed in seconds and will be in the range of 1 and
65535.
Maximum Requests The maximum number of times the authenticator state machine on this port will
retransmit an EAPOL EAP Request/Identity before timing out the supplicant.
The value will be in the range of 1 and 10.