User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-8 Switching Commands
202-10102-01, May 2005
Packets Transmitted 1024-1518 Octets - The total number of packets
(including bad packets) received that were between 1024 and 1518
octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Transmitted 1519-1522 Octets - The total number of packets
(including bad packets) received that were between 1519 and 1522
octets in length inclusive (excluding framing bits but including FCS
octets).
Max Info - The maximum size of the Info (non-MAC) field that this
port will receive or transmit.
Packets Transmitted Successfully
Total - The number of frames that have been transmitted by this port to
its segment.
Unicast Packets Transmitted - The total number of packets that
higher-level protocols requested be transmitted to a subnetwork-unicast
address, including those that were discarded or not sent.
Multicast Packets Transmitted - The total number of packets that
higher-level protocols requested be transmitted to a Multicast address,
including those that were discarded or not sent.
Broadcast Packets Transmitted - The total number of packets that
higher-level protocols requested be transmitted to the Broadcast
address, including those that were discarded or not sent.
Transmit Errors
Total Errors - The sum of Single, Multiple, and Excessive Collisions.
Tx FCS Errors - The total number of packets transmitted that had a
length (excluding framing bits, but including FCS octets) of between 64
and 1518 octets, inclusive, but had a bad Frame Check Sequence (FCS)
with an integral number of octets
Oversized - The total number of frames that exceeded the max permit-
ted frame size. This counter has a max increment rate of 815 counts per
sec. at 10 Mb/s.
Underrun Errors - The total number of frames discarded because the
transmit FIFO buffer became empty during frame transmission.
Transmit Discards
Total Discards - The sum of single collision frames discarded, multiple
collision frames discarded, and excessive frames discarded.
Single Collision Frames - A count of the number of successfully trans-
mitted frames on a particular interface for which transmission is inhib-
ited by exactly one collision.
To Next Page
Loading...
