Setting Settings values Function
[Color highlight-
ing]
[On]
[Off]
Set to [On]:
• to make notes made with marker pens more
visible.
• to emphasize colors, of a CAD drawings
with colored information and a solely gray-
scale (black) background information.
NOTE
• When the [Color mode] is set to
[Color], color highlighting will
make the colors more saturated.
• When the [Color mode] is set to
[Grayscale], colors will be scan-
ned darker than the grayscale in-
formation on the original.
• The setting is disabled for the
original types, [Photo], [Artwork],
[Blueprint].
Category: [Workflow]
Setting Settings values Function
[Destination] [Type] Select the location you want to scan to.
For more information, see
Configure your loca-
tions
on page 102.
[Scan name] Use the keyboard to change the scan file
name.
[Check print] [On]
[Off]
Set to [On] to make a print of your scanned im-
age.
Advanced settings for scan jobs
196
Chapter 4 - Use the Printing System
To Next Page
Loading...
