262
RS-232C Communication
Cha
ter 11
11.2.5 List of Commands
PV310 provides the following commands:
Type of Command Command Reference
page
Commands for inspection start To execute inspection %S 263
To transmit product type and configuration data in a
Compact Flash memory card to the PV310
%F 264
Smart Matching, Contour Matching - Re-registering
a template
%A 265
Slice Level - Reading Min./ Max
%L 267
Slice Level - Changing Min. / Max.
%T 268
Gray Edge - Reading threshold of edge
%H 270
Gray Edge - Changing threshold of edge
%G 272
Num. Calcu. - Reading Min. /Max.
%C 276
Commands for reading or
changing the setting data
stored in the PV310
Num. Calcu. - Changing Min. /Max.
%N 278
Data Save - Storing the current settings in the PV310 %M 280
Switching to another product type
%X 280
Resetting Statistics Data
%Q 280
Changing Display Image
%I 281
Other
Emulating the Keypad
%K 282
• About the commands for changing each setting value
The PV310 will lose the images if the power is removed before you save them.
- Smart Matching, Contour Matching - Re-registering templates
- Slice Level: Changing upper/lower limits
- Gray Edge: Changing edge threshold
- Num. Calcu.: Changing the max./min. values
To Next Page
Loading...
