Panasonic Micro-Imagechecker PV310 - Selecting a Camera Mode

57
Cha
p
ter 5
Procedure for Settin
g
Ins
p
ection Conditions
5.2 Selecting a Camera Mode
Select a camera type and a camera mode.
1. Highlight "ENVIRONMENT" in the menu bar.
The ENVIRONMENT menu is displayed.
2. Select "Initial Settings".
The Initial Settings menu is displayed.
3. Highlight "Camera Mode".
The two types of cameras, double-speed random camera (ANM831) and
normal camera (ANM832), are available in PV310. If you change the
camera mode to another, save the data and reboot the PV310.
Camera
mode
Camera Resolution
(unit: pixel)
Image capture time Remarks
D.S.
Random
Frame
ANM831 512 x 480 Shutter speed
+16.7ms
Captures an image from start signal input
without delay. In this mode, a moving object can
be captured in high resolution and at the highest
speed.
D.S.
Random
Field
ANM831 512 x 240* Shutter speed + 8.4
ms
Captures an image from start signal input
without delay. In this mode, a moving object can
be captured in high resolution and at the highest
speed, but the resolution in the vertical direction
drops to half.
Normal
Frame
ANM832 /
ANPVCA1012
512 x 480 33.3 to 50.0 ms
(including max. 16.7
ms delay time)
Captures a static object using continuous
lighting and a moving object using electric flash.
You cannot change the shutter speed.
Normal
Field
ANM832 /
ANPVCA1012
512 x 240* 16.7 to 33.3 ms
(including max.
16.7 ms delay time)
Captures a moving object by changing the
shutter speed.
Max. 16.7 ms. delay time occurs from the start
signal input to image capturing.
The vertical resolution drops to the half size.
With an ultra compact camera, change the
shutter speed with the camera control unit.
Int. Sync
Mode
Frame
- 512 x 480 33.3 to 50.0 ms
(including max. 16.7
ms delay time)
Captures a still image by inputting NTSC signal
(still image).
Int. Sync
Mode
Field
- 512 x 240* 16.7 to 33.3 ms
(including max.
16.7 ms delay time)
Captures a moving image by inputting NTSC
signal (motion image). The resolution in the
vertical direction drops to half.