Panasonic Micro-Imagechecker PV310 - Page 284

276
RS-232C Communication
Cha
p
ter 11
Reading Max. /Min. Numeric Calculation (%C)
This command is for reading Min./Max. Numeric Calculation (01 to 96). The max./min. numeric calculation of the
product type currently selected by the PV310 can be read.
Command format: Comma separated
Communication direction Command / Description
From external device to PV310
% C ? ? CR
?? : 01 to 96 (Specify the numeric calculation number in 2-digit form.)
Response: Normal
% C ? ? , Min. , Max. CR
?? : 01 to 96 (Specify the numeric calculation number in 2-digit form.)
Min.: - 2147483648 to 2147483647 (up to 11 digits including a “-“ (minus sign))
Max.: - 2147483648 to 2147483647 (up to 11 digits including a “-“ (minus sign))
Response: Error 1
% U CR
Cause:
Command in the unspecified form or not provided was received.
Examples:
- %C3
C
R
(any other numeric calculation number than 01 to 96 was
specified)
- %B03
C
R
(not provided command)
Response: Error 2
• ERROR signal = “ON”
• Error Code: E0178 is
displayed on the screen
% Z CR
Cause:
Numeric calculation No. specified by the sending command does not exist.