R&S ESR Series

Remote Control
R&S
®
ESR
1040User Manual 1175.7068.02 ─ 12
11.18.1 GPIB Languages
The R&S ESR analyzer family supports a subset of the GPIB commands used by other
devices. Thus it can emulate other devices in order to use existing remote control pro-
grams.
Supported languages
Language Comment
SCPI
71100C Compatible to 8566A/B
71200C Compatible to 8566A/B
71209A Compatible to 8566A/B
8560E
8561E
8562E
8563E
8564E
8565E
8566A Command sets A and B are available. Command sets A and B differ in the rules
regarding the command structure.
8566B
8568A Command sets A and B are available. Command sets A and B differ in the rules
regarding the command structure.
8568A_DC Uses DC input coupling by default if supported by the instrument
8568B Command sets A and B are available. Command sets A and B differ in the rules
regarding the command structure.
8568B_DC Uses DC input coupling by default if supported by the instrument
8591E Compatible to 8594E
8594E Command sets A and B are available. Command sets A and B differ in the rules
regarding the command structure.
PSA89600
PSA
ESA
Notes:
●
If you select a language other than "SCPI", the GPIB address is set to 18 if it was
20 before.
●
The Start/stop frequency, reference level and number of sweep points are adapted
to the selected instrument model.
GPIB Commands of HP Models 856xE, 8566A/B, 8568A/B and 8594E