R&S ESR Series User Manual

Remote Control
R&S
®
ESR
987User Manual 1175.7068.02 ─ 12
MMEMory:USER<Softkey> <Filename>, <Label>
This command defines the settings file to be loaded when the specified user-definable
softkey is selected. The settings file must exist, otherwise an error occurs.
Suffix:
<Softkey>
.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
Number of the softkey in the "User" menu.
Parameters:
<Filename> string
This parameter defines the path and file name of the settings to
be loaded.
<Label> string
This parameter defines the label of the user-definable softkey.
*RST: User<Softkey_number>
Example:
MMEM:USER1 'C:\MySaveSets\Set1','Set1'
Loads settings file Set1 when the "Set1" softkey in the "User"
menu is selected.
Example:
MMEM:USER3 'C:\MySaveSets\Set3',''
Loads settings file Set3 when the "User3" softkey in the "User"
menu is selected.
11.15 Network Connection
● Configuring Network Connections.........................................................................987
● Emulating HP Instruments.................................................................................... 991
11.15.1 Configuring Network Connections
MMEMory:NETWork:DISConnect.................................................................................... 987
MMEMory:NETWork:MAP...............................................................................................988
MMEMory:NETWork:UNUSeddrives?.............................................................................. 988
MMEMory:NETWork:USEDdrives?.................................................................................. 989
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess............................................................... 989
SYSTem:COMMunicate:GPIB[:SELF]:RTERminator.......................................................... 989
SYSTem:LXI:INFo?........................................................................................................ 990
SYSTem:LXI:LANReset.................................................................................................. 990
SYSTem:LXI:MDEScription............................................................................................. 990
SYSTem:LXI:PASSword..................................................................................................990
MMEMory:NETWork:DISConnect <Drive>
This command disconnects the selected drive.
Network Connection

R&S ESR Series Specifications

General

Brand	R&S
Model	ESR Series
Category	Receiver
Language	English