R&S ESR Series User Manual

Remote Control
R&S
®
ESR
968User Manual 1175.7068.02 ─ 12
<Item> Description Default
RESultlist Numerical measurement results.
SETTings Settings that have been used during a measurement. x
TDSTamp Date and time of the measurement. x
TRANsducer Characteristics of the transducer.
Table 11-30: Available <items> in real-time application
<Item> Description Default
DIAGram Screenshot of the persistence spectrum.
HEADer Header made up of several lines of information that is (by
default) displayed on each page of the test report.
x
PAGecount Page numbers. x
REALtime Screenshot of the real-time spectrum.
RESultlist Numerical measurement results.
SETTings Settings that have been used during a measurement. x
SPECtrogram Screenshot of the spectrogram.
TDSTamp Date and time of the measurement. x
TRANsducer Characteristics of the transducer.
11.13.1.2 Designing the Header of the Test Report
Commands useful to design the test report header described elsewhere:
●
HCOPy:TREPort:ITEM:DEFault on page 966
HCOPy:TREPort:ITEM:HEADer:LINE<line>:CONTrol........................................................ 968
HCOPy:TREPort:ITEM:HEADer:LINE<line>:TEXT............................................................ 969
HCOPy:TREPort:ITEM:HEADer:LINE<line>:TITLe............................................................ 969
HCOPy:TREPort:ITEM:LOGO.........................................................................................970
HCOPy:TREPort:ITEM:LOGO:CONTrol........................................................................... 971
HCOPy:TREPort:ITEM:HEADer:LINE<line>:CONTrol <Repitition>
This command selects how often the items in the report header are displayed in the
document.
Suffix:
<line>
.
1...7
Selects the header line.
Parameters:
<Repitition> ALWays
The selected header line is displayed at the top of every page of
the report.
Working with Test Reports

R&S ESR Series Specifications

General

Brand	R&S
Model	ESR Series
Category	Receiver
Language	English